This is a reproduction, not a photocopy, of an original Nardini SZ-2000/T and SZ-2500/T Metal Lathe Instructions and Parts Manual.This manual contains all the information listed below in the contents, and should cover the following models:

SZ-2040 SZ-2040T SZ-20157 SZ-20157T SZ-2540 SZ-2540T SZ-25157 SZ-25157T

Contents:

Specifications..........................................7

Lifting and cleanlines..................................8

Foundation..............................................9

Levelling and eletrical connections....................10

Dimensions and principal assemblies....................11

Lubrication............................................12

Oil change.............................................13

Lathe controls.........................................14

Lathe operations.......................................15

Headstock instructions.................................16

Threads and feeds gear box instructions................17

Threads and feeds gear box data plate..................18

Saddle instructions....................................19

Apron instructions.....................................20

Tailstock..............................................21

Motor Driving System...................................22

Change Gears...........................................23

Threads Cutting Indicator..............................24

Spindle Adjustment.....................................25

Electrical Diagram.....................................26

Brake System...........................................27

Parts List Introduction................................28

Headstock SZ-MI-751C...................................29

Headstock SZ-MI-752C...................................30

Headstock SZ-MI-753C...................................33

Headstock SZ-MI-754C...................................34

Gear Box SZ-MI-755C ...................................36

Gear Box SZ-MI-756C....................................38

Gear Box SZ-MI-757C....................................40

Saddle SZ-MI-758C......................................42

Tool Post, Rear Tool Post and Movable Support..........44

Apron SZ-MI-778C.......................................46

Apron SZ-MI-779C.......................................48

Tailstock SZ-MI-762C...................................50

Bed SZ-MI-763C.........................................52

Change Gears SZ-MI-764C................................54

Clutch and Brake Box SZ-MI-766C........................56

Motor Drive System SZ-MI-767C..........................57

Follow RestSZ-MI-768C..................................58

Steady RestSZ-MI-769C..................................59

Micrometer Stop SZ-MI-770C.............................60

Lubrication SZ-MI-771C.................................62

Taper Attachment SZ-MI-772C............................64

Coolant Unit SZ-MI-773C................................65

Threads and Feeds Gear Box SZ-MI-774C..................66

Chip Guard SZMI-775C...................................67

Chuck Guard SZ-MI-776C.................................68

Spindle Noses SZ-M I-777C..............................69

Picture from inside:

Overview:

I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.