Description
Number of Pages: 24
This is a reproduction, not a photocopy, of an original South Bend 20″ Turn-nado Gear Head Lathe Operations and Maintenance Manual. This manual contains information on operating instructions, maintenance, adjustments and lubricating instructions. Please see index below.
Index
SECTION 1 DESCRIPTION
INTRODUCTION …………………………..1
FUNCTIONAL DESCRIPTIONS …………………1
SECTION 2 PREPARATION FOR USE ………………2
LOCATION ………………………………2
UNCRATING ……………………………..2
INITIAL CLEANING ……………………..3
INITIAL LUBRICATION …………………….3
ANCHOR BOLTING………………………….3
LIFTING LATHE ………………………….3
LEVELING ………………………………4
INITIAL STARTING………………………..6
SECTION 3 OPERATION……………………..7,10
SCOPE……………………………….7,10
USES OF CONTROLS AND INDICATORS……….7,8,9
SECTION 4 LUBRICATION………………..10
LUBRICATION SYSTEMS……………………10
DAILY CARE OF THE LATHE ………………..12
RECOMMENDED LUBRICANTS ………………10
SECTION 5 MAINTENANCE …………………….13
INSPECTIONS AND ADJUSTMENTS…………13,14
REPAIRS AND REPLACEMENTS………………..18
SECTION 6 OPERATIONAL CHECKS……………….19
SECTION 7 SHUTDOWN AND STORAGE……………..20
SECTION 8 SPECIFICATIONS…………………..21
Overview:
I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page, and removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear.